Ex-Demonstration and Second Hand Corrosion Cabinets
The UK's Leading Manufacturer of Corrosion Test Cabinets
ISO 9001 Registered Company BS EN ISO 9001:2015
All cabinets are CE marked and have calibration traceable to UKAS.
Certificates of conformity are supplied on request.
Due to continuous development we reserve the right to introduce improvements and /or modify specifications without prior notice.
MICROPROCESSOR/CONTROLLER A high specification unit for control with the capacity to hold up to 20 programs. The controller is easy to operate with rapid program selection complete with manual over-ride facility, bar-graph display, program status display and cycles completed counter. All programs are protected with security code access.
TEMPERATURE RECORDER Continuous paper type chart recorder with ON/OFF control for individual test records.
FULL VISUAL DISPLAY All events, cycles and test conditions.
KEYLOCK A tamperproof security system to prevent unauthorised program access.
CABINET HUMIDIFIER Internal heated water bath with automatic level control ensures high Relative Humidity during the relevant periods of the test cycle.
HEAVY DUTY PERISTALTIC PUMP with VARIABLE SPEED For accurate control of salt solution flow to the atomiser, indispensable for precise collection rates, also eliminates atomiser blockage.
EXTERNAL SALT SOLUTION RESERVOIR and INTEGRAL FILTER For easy cleaning and filling.
INTERNAL HEAT EXCHANGER To pre-heat the salt solution to the required temperature before introduction to the atomiser.
ACCURATE FLOWMETER Panel mounted, to monitor salt solution flow.
SOPHISTICATED LUCITE ATOMISER For baffle free mist generation ensuring precise fall-out readings throughout the chamber.
AIR REGULATOR/PRESSURE GAUGE To control and monitor the air pressure required for precise salt fog collection rates.
DRY/MOIST (humid) AIR CONTROL A simple switch-over device for required setting, depending upon specified Salt Spray Standard procedure. A compact internal air saturation unit, fully protected against overheating and low water. Automatic, self-filling system, complete with digital display of water temperature.
AUTOMATIC AIR PURGE Incorporated into test program.
Contact Us Today
C&W Specialist Equipment Ltd
Tel: +44 (0)1547 540654
Fax: +44 (0)1547 540412
Company Reg No: 2171963
Company VAT No: GB 478 8266 84